-
Center cut-out area runs from the front to the back of the cushion, creating strategic points of no contact
-
Back cutaway allows for tailbone and prostate relief and has a tapered transition for increased comfort
-
Unique inflatable, multiple-cell design for the ultimate in comfortable seating and vibration absorption
-
Made from polyurethane and features a breathable, stretchable outer cover and a nonskid urethane base to protect your seat
-
Features open-mesh side panel to allow air circulation through individual air cells, creating extra ventilation to reduce heat buildup
-
Patented Shape Fitting Technology eliminates painful pressure points and promotes consistent blood flow for a longer, more comfortable ride
-
Automatically adjusts to the shape of the rider
-
Raises ride-height only slightly
-
Securely fastens via double strap system running under seat or pillion
-
Will not scratch or disfigure existing seat or pillion
-
Valve for inflation, adjustment and deflation
-
Made in the U.S.A.
Cover
The cover is constructed with a breathable spandex and spacer mesh that allow air to flow through the seat. The air flow keeps you cool and comfortable when sitting for long periods of time. The removable, inflatable air pad is made with AirHawk patented air cell technology, which works better with your body than gel or memory foam.
How can AirHawk air cell technology help you and your long ride?
With an AirHawk cushion you can sit for longer with less negative side effects. It permits better circulation throughout your body, which is not only good for your heart, but promotes an overall feeling of more energy. And in the long term, your hips, back, neck and joints will feel less pressure, which can have a significantly positive impact on your body over time.
The AirHawk cushion comes in two components:
- A cover with a sleek appearance that zips open to reveal the cushion insert.
- The removable, inflatable air pad.
AirHawk Motorcycle Seat Instruction Manual
|
|
|
|
|---|---|---|
Step 1Turn cushion valve counter-clockwise to open. |
Step 2Inflate cushion by mouth until the cushion is filled with air. |
Step 3Turn the valve clockwise to close. |
Proper adjustment can only be done while you are sitting on the cushion
|
|
|
|
|---|---|---|
Step 4Place cushion on your motorcycle, with the air cells facing upward. Sit on the seat in your normal riding position. Place both feet on pegs. |
Step 5Important! Adjust the air by opening the fill valve and releasing air until you sink down into the cushion. Close fill valve. Ideal inflation is about 1/2 inch off the seat. If you bottom out on the base of the seat, add more air through the fill valve and adjust again. Do Not Overinflate. This product works most effectively with a minimal amount of air. |
Step 6Turn the valve clockwise to close. You can check that you have not let all the air out of the cushion by slowly leaning your body (not necessarily your bike) from side to side. You should be able to feel the air transferring beneath you slightly. If too much air is transferring beneath you, let more air out of the cushion. |
